.. note::

    Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

    **Why Join?**

    - **Expert Support**: Solve post-sale issues and technical challenges with help from our community and team.
    - **Learn & Share**: Exchange tips and tutorials to enhance your skills.
    - **Exclusive Previews**: Get early access to new product announcements and sneak peeks.
    - **Special Discounts**: Enjoy exclusive discounts on our newest products.
    - **Festive Promotions and Giveaways**: Take part in giveaways and holiday promotions.

    👉 Ready to explore and create with us? Click [|link_sf_facebook|] and join today!

Lesson 16:  Sequence of Colors in RGB LED With Micropython
=============================================================================

This tutorial covers using for loops in MicroPython with the Raspberry Pi Pico W to control an RGB LED:

* **Introduction**: Overview of using for loops and PWM to control RGB LED brightness and color.
* **Circuit Setup**: Wiring the RGB LED to GPIO pins 13, 14, and 15, using 330 Ohm resistors.
* **PWM Setup**: Setting up PWM on each LED channel with a frequency of 1000 Hz for smooth transitions.
* **Color Sequence Input**: Prompting the user for a color sequence, storing inputs in an array.
* **Color Control Logic**: Using if statements to assign PWM values for colors like red, green, blue, cyan, magenta, yellow, orange, and off.
* **Continuous Loop**: Cycling through the color sequence using a while true loop with sleep statements.



**Video**

.. raw:: html

    <iframe width="700" height="500" src="https://www.youtube.com/embed/VivNlgYg3wY?si=ECUsRAWanIAShyxk" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>