.. note::

    Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

    **Why Join?**

    - **Expert Support**: Solve post-sale issues and technical challenges with help from our community and team.
    - **Learn & Share**: Exchange tips and tutorials to enhance your skills.
    - **Exclusive Previews**: Get early access to new product announcements and sneak peeks.
    - **Special Discounts**: Enjoy exclusive discounts on our newest products.
    - **Festive Promotions and Giveaways**: Take part in giveaways and holiday promotions.

    👉 Ready to explore and create with us? Click [|link_sf_facebook|] and join today!

.. _remote_desktop:

Remote Desktop Access for Raspberry Pi
==================================================

For those preferring a graphical user interface (GUI) over command-line access, the Raspberry Pi supports remote desktop functionality. This guide will walk you through setting up and using VNC (Virtual Network Computing) for remote access.

We recommend using `VNC® Viewer <https://www.realvnc.com/en/connect/download/viewer/>`_ for this purpose.

**Enabling VNC Service on Raspberry Pi**

VNC service comes pre-installed in the Raspberry Pi OS but is disabled by default. Follow these steps to enable it:

#. Enter the following command in the Raspberry Pi terminal:

    .. raw:: html

        <run></run>

    .. code-block:: 

        sudo raspi-config

#. Navigate to **Interfacing Options** using the down arrow key, then press **Enter**.

    .. image:: img/config_interface.png
        :align: center

#. Select **VNC** from the options.

    .. image:: img/vnc.png
        :align: center

#. Use the arrow keys to choose **<Yes>** -> **<OK>** -> **<Finish>** and finalize the VNC service activation.

    .. image:: img/vnc_yes.png
        :align: center

**Logging in via VNC Viewer**

#. Download and install `VNC Viewer <https://www.realvnc.com/en/connect/download/viewer/>`_ on your personal computer.

#. Once installed, launch VNC Viewer. Enter the hostname or IP address of your Raspberry Pi and press Enter.

    .. image:: img/vnc_viewer1.png
        :align: center

#. When prompted, enter your Raspberry Pi's username and password, then click **OK**.

    .. image:: img/vnc_viewer2.png
        :align: center

#. You'll now have access to your Raspberry Pi's desktop interface.

    .. image:: img/bullseye_desktop.png
        :align: center