.. note::

    Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

    **Why Join?**

    - **Expert Support**: Solve post-sale issues and technical challenges with help from our community and team.
    - **Learn & Share**: Exchange tips and tutorials to enhance your skills.
    - **Exclusive Previews**: Get early access to new product announcements and sneak peeks.
    - **Special Discounts**: Enjoy exclusive discounts on our newest products.
    - **Festive Promotions and Giveaways**: Take part in giveaways and holiday promotions.

    👉 Ready to explore and create with us? Click [|link_sf_facebook|] and join today!

.. _drag_number:

Drag Number
================================================

Let\'s draw a slider bar to control the 7-segment Display.

.. image:: img/drag_servo.png

**Required Components**

In this project, we need the following components.

It's definitely convenient to buy a whole kit, here's the link: 

.. list-table::
    :widths: 20 20 20
    :header-rows: 1

    *   - Name	
        - ITEMS IN THIS KIT
        - LINK
    *   - Raphael Kit
        - 337
        - |link_Raphael_kit|

You can also buy them separately from the links below.

.. list-table::
    :widths: 30 20
    :header-rows: 1

    *   - COMPONENT INTRODUCTION
        - PURCHASE LINK

    *   - :ref:`cpn_gpio_extension_board`
        - |link_gpio_board_buy|
    *   - :ref:`cpn_breadboard`
        - |link_breadboard_buy|
    *   - :ref:`cpn_wires`
        - |link_wires_buy|
    *   - :ref:`cpn_resistor`
        - |link_resistor_buy|
    *   - :ref:`cpn_7_segment`
        - |link_7segment_buy|
    *   - :ref:`cpn_74hc595`
        - |link_74hc595_buy|

**Wiring**

.. image:: img/image125.png

**Sketch**

.. code-block:: arduino

    import processing.io.*;

    int number = 0;
    int levelRange=9;
    Slider mySlider;

    int SDI=17;   //serial data input
    int RCLK=18;  //memory clock input(STCP)
    int SRCLK =27;   //shift register clock input(SHCP)


    int[] SegCode= {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71};

    void hc595_shift(int dat){
    int i;

    for(i=0;i<8;i++){
        int n=(0x80 & (dat << i)); 
        if ( n==0){
        GPIO.digitalWrite(SDI, 0);
        } else {
        GPIO.digitalWrite(SDI, 1);
        }
        GPIO.digitalWrite(SRCLK, 1);
        delay(1);
        GPIO.digitalWrite(SRCLK, 0);
    }

        GPIO.digitalWrite(RCLK, 1);
        delay(1);
        GPIO.digitalWrite(RCLK, 0);
    }

    void setup() {
        size(400, 200);
        frameRate(50);
        mySlider = new Slider(width * 0.2,height * 0.4,width * 0.8,height * 0.6,0,levelRange,number);
        GPIO.pinMode(SDI, GPIO.OUTPUT); 
        GPIO.pinMode(RCLK, GPIO.OUTPUT); 
        GPIO.pinMode(SRCLK, GPIO.OUTPUT); 
    
        GPIO.digitalWrite(SDI, 0);
        GPIO.digitalWrite(RCLK, 0);
        GPIO.digitalWrite(SRCLK, 0);
    }

    void draw() {

        background(255);
        mySlider.show();
        hc595_shift(SegCode[number]);
    }

    void mouseDragged(){
        number = mySlider.dragPoint(mouseX,mouseY);
    }



    class Slider{
        float slotPointAX;
        float slotPointBX;
        float slotPointAY;
        float slotPointBY;
        float linePoint;
        float depth;
        int maxRange;
        int minRange;
        int value;

        Slider(float ax, float ay, float bx, float by, int min, int max, int v){
            slotPointAX = ax;
            slotPointAY = ay;
            slotPointBX = bx;
            slotPointBY = by;
            maxRange = max;
            minRange = min;
            value = v;
            linePoint = slotPointAX;// + map(value, minRange, maxRange, slotPointAX, slotPointBX);
            depth = (slotPointBY - slotPointAY)*0.75;
        }

        void show(){
            rectMode(CORNERS);
            fill(200);
            stroke(255,0,0);
            rect(slotPointAX, slotPointAY, slotPointBX, slotPointBY);
            fill(255,0,0);
            rect(slotPointAX, slotPointAY, linePoint, slotPointBY);
            fill(200);
            textSize(depth);
            text(minRange, slotPointAX, slotPointBY+depth);
            text(maxRange, slotPointBX, slotPointBY+depth);
            text(value, linePoint, slotPointAY);
        }

        int dragPoint(float mx, float my){
            if(mx>=slotPointAX && mx<=slotPointBX && my>=slotPointAY && my<=slotPointBY){
                value = int(map(mx,slotPointAX,slotPointBX,minRange,maxRange));
                linePoint = map(value,minRange,maxRange,slotPointAX,slotPointBX);
            }
            return value;
        }
    }

**How it works?**

This project integrates the Slider and 7-segment Display of the previous project. For specific knowledge points, please refer to :ref:`show_number` and :ref:`metronome`.